We have your shipping location set to UNITED STATES (Change) Close


Every mural is made to measure, with your choice of
standard or premium, textured wall coverings.

[email protected]

T. +44(0)118 922 1327


Each made-to-measure mural is customised to your exact specifications; select your size, crop and finish, then we’ll make it for you. You can choose between our standard mural, our handy Just Stick It Up option or from a choice of premium textured finishes.

There’s no limit to the size of your mural, as it comes supplied in manageable ‘drops’ of up to 1200mm (48”). Available from 1000 x 1000mm.



You can choose between our standard mural finishes or from a choice of premium textured finishes.

Satin Smooth (standard)
Supplied in easy to apply sections, these standard murals boast a satin smooth finish on durable heavy gauge paper, and are ready for installation using the ‘paste the wall’ method.

Just Stick It Up™ (standard)
Our self-adhesive options use Just Stick It Up technology, featuring ‘forgiving’ adhesive qualities which allow the less confident installer a chance to reposition the mural to get it perfect.

Linen Textured (premium)
A favourite with interior designers, these textured wallcoverings feature a woven finish reminiscent of printed fabric, for a warm and soft effect. Ready for installation using the ‘paste the wall’ method.

Oriental Style (premium)
Oriental textured papers offer a subtle texture reminiscent of handmade papers, to create a luxurious effect. Ready for installation using the ‘paste the wall’ method.

All our prints retain the character of the original image. Each print is sealed and designed to remain vibrant throughout its lifetime. Approved to class 0 and Class 1 rating.



Our made-to-measure wall murals are supplied within 12 working days, in sections, rolled and packed in tubes. We supply full installation guides, soft squeegees and plastic strips to protect your wall when you trim your mural to fit.

Worldwide shipping is FREE for all orders over £150. For orders under £150, shipping is £15.

To help track the progress of your Surface View product we provide an email receipt with your order, personal confirmation, estimated delivery date and tracking details of your dispatched product.


How to

Our wall murals come in 1200mm wide sections, making them easy to install whether you’ve chosen our ‘paste the wall’ method (Satin smooth, Linen textured and Oriental style finishes) or the self-adhesive Just Stick It Up option.

Please read these instructions carefully before installing your mural. These instructions can also be downloaded as a PDF. If you’d rather we took care of it, contact us to arrange professional installation by our specialists.

Our wall murals have been developed for the ‘paste the wall’ method, and are ready for installing onto walls that have been plastered and painted with emulsion. For our Just Stick It Up murals, we recommend that your wall has an acrylic egg shell finish. If you have any questions about the suitability of your walls for our mural product please contact us.

Supplied with your mural:
Soft squeegee
50mm protective plastic strips to the height of your wall.

What else you’ll need:
Tape measure
Spirit level or plumb line
Soft pencil
Masking tape
Stanley knife or sharp blade
Ready mixed heavy duty wallpaper paste (not necessary for Just Stick It Up)
Wallpaper paste brush or roller (not necessary for Just Stick It Up).

How to install:
Ensure your wall surface to be covered is clean, smooth, dry and in a sound condition. Dry and absorbent surfaces need to be painted or sealed using a water based primer-sealer.

1) Starting out.
The wall mural is supplied in ‘drops’ of equal width (up to 1200 mm) and length. Carefully unpack these drops and lay them out in order. You’ll note that the whole image has an additional 50mm bleed all round and each section join has a 25mm overlap left and right, to create an overlap that’s cut back to create an accurate butt join. Whilst laid out, use your masking tape to create handy markers as guides to where the image from the different panels line up, mark these points on the tape. Roll up and label each roll.

2) The first piece.
Key to a successful installation is getting the correct starting position on the wall. Each panel has bleed marks and a mid point mark to help positioning. Start by measuring the width of the first drop (minus 50mm for the extra bleed). Use this measurement to draw a vertical line from the right hand edge of the wall; use a plumb line or spirit level to ensure that it’s completely vertical.

Surface View tip. We recommend starting the installation with the right hand panel to assist with trimming the section panels. If you’d prefer to start with the left hand panel, make sure you reverse the left/right instructions in this guide.

Apply a ready mixed heavy duty wallpaper paste to the wall, one section at a time. This is not necessary for Just Stick It Up murals – simply start to peel away the protective backing from the top.

Fix the first drop from the right hand side, making sure the left hand edge of this drop aligns with the vertical line. This is the most critical point and this first panel must be vertical to the plumb line. Smooth out any bubbles or ripples with a brush or your squeegee, in a vertical direction only. Wipe off any excess paste with a damp sponge.

3) Applying the second and subsequent drops.
Apply wallpaper paste to the next section of wall. The second and subsequent drops should be overlapped by 50mm to make sure that the image aligns accurately. Use your masking tape guides to help align these image overlaps. Smooth out any bubbles or ripples with a brush or your squeegee, in a vertical direction. Continue until all panels are up before moving on to trimming. Remove masking tape.

4. Trim top and bottom.
Trim the right hand edge and the top and bottom, using a straight edge for guidance.

5. Trimming the joins.
Gently lift the two overlapped edges and fix the supplied 50mm plastic strip to the wall (the paste should hold it in place) under the lifted edges. Smooth the edges over the plastic strip. Using a straight edge and sharp blade, trim down the middle of the overlap, then remove the plastic strip and excess wall mural. A final application of paste can be applied beneath the joints using a paintbrush. Smooth down both edges to make a seamless butt join, making sure the wall mural is fixed at the edges.

If you have any problems with installation, please contact us on +44(0)118 922 1327 or email [email protected] for further information and advice.